Process...
Pre-detail Inspection is carried out taking note of any damage found on the car prior to any work. Paintwork is inspected for defects and thickness measured using a paint depth gauge to highlight any repainted or areas of high risk before paint correction is carried out. These will be measured and recorded before and after and sent to you within a followup up vehicle report report.
Exterior
- Alloys and tires cleaned with a pH neutral wheel cleaner/ degreaser
- Wheel arches, calipers, door/boot shuts and wheels brush cleaned with citrus degreaser
- Vehicle is pre rinsed with a ‘Snow Foam’, that safely loosens surface dirt
- Intricate details on the car are agitated with soft brushes and all purpose cleaner
- Any chrome will be treated with Acid Rain and Mineral/limescale remover
- Vehicle washed using a microfibre wash mitt and 2 buckets with pH-neutral shampoo
- Bonded iron contaminants removed from paint using a dedicated fallout remover.
- Bonded tar contaminants removed using tar remover.
- Second Pre-wash to ensure all products used so far are fully removed
- Clay bar is then used as a final decontamination step to remove contamination that are lodged into the paintwork..
- Full set of paint thickness readings taken
- Single stage machine polishing process to remove fine swirl marks restoring gloss & depth of shine (60-70% reduction in swirl marks)
- Paint cleansed and wiped down in preparation for protection, allowing total bonding with the paintwork.
- Windows and mirrors are cleaned and protected.
- High quality carnauba Wax sealant applied, ultra hydrophobic with an impressive durability of 6-8 months. or Ceramic spray lasting 3 months
- Or opt for Ceramic coating add on
- Plastics and rubber protected to avoid fading.
- Final wipe down using a gloss-enhancing detailing spray.
Trims:
- All plastic trim cleaned/ restored and protected
- Exhausts cleaned/restored and protected
Wheels:
- Wheels washed front and back using an pH neutral wheel cleaner/degreaser and soft brushes, safe for any finish.
- Bonded tar contaminants removed
- Bonded iron contaminants removed
- Machine polished using mini detailer
- Wheels are maintained with a high quality sealant
- Tyre dressing applied giving a high gloss finish
Post inspection/handover
Level 1 - Enhancement
£349.00
